Follow

Zebra Printer and Router Setup

Setting up your router:
The router comes with the power adapter, optional a Verizon internet stick
and and of course the router.

If your venue supplies you with a hardwired internet line - plug it
into the blue outlet of the router. If you do not have access to this
hardwired connection or want to use an additional backup connection you
can use the Verizon internet stick.

Rotate the USB sticks cover which functions as an antenna and plug the
stick into the USB outlet of the router. Plug in the router to a power outlet and switch on the power.

Setting up the Zebra printer:
First connect the power supply. Plug the power cord into the the AC Adapter.
Next plug the small round plug into the back of the printer. Now connect the Power cord to a power outlet.

Connecting your printer to the router:
For this use the provided Ethernet cable. One end of the ethernet cable goes into the back of the printer and the other end goes into one of the 4 yellow outlets of the router. 

You can connect up to 4 printer to a router. Make sure the power switch is on for your printer.

Setting up the printer on the Boomset App: 
Now move over to the printer settings in the Boomset App.
First make sure that your iPad is connected to your router's wireless network. To check, tap on the Settings icon in your iPad. 

In most cases you will find the network name and password printed on your router.

Open the Boomset app and log into your account. If you have not downloaded the app yet, please do so at this time from the App Store.

Once you're logged in your events will appear on the right side and on the
lower left corner you will see that no printer is currently selected. The printer icon will be grey.

Select the PRINTER SETUP option from the left column. All printers connected to your router will appear in this page. Choose the printer you would like to connect to the iPad.

Finally you can open your event.
But before printing make sure that your badges are set to AUTO PRINT.
Tap on the gear symbol on top right corner and select AUTO PRINT. 

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments